
SupplySide Global is back at Mandalay Bay October 28–30, and if you’re walking the expo hall, you’ll come home with a stack of samples, spec sheets and business cards. The real vetting starts after the show, when you ask a new supplier for Certificates of Analysis (COAs). A COA is a good starting point, but it won’t tell you how a supplier tests or whether those results will hold up in an audit. Under FDA’s dietary supplement cGMPs, product quality is ultimately the brand’s responsibility.
Our team at New Wave Scientific will be on the floor too. These are the questions we’d ask any ingredient supplier or co-packer you’re considering, whether you make supplements or food and beverage products.
7 Questions To Ask Suppliers & Co-Packers
1. Who Does Your Testing?
Ask whether results come from an ISO/IEC 17025 accredited lab, and check that the tests you care about are on that lab’s scope of accreditation. For supplements, FDA’s cGMPs (21 CFR Part 111) expect testing that confirms identity, verifies the strength of actives and vitamins, and screens for contaminants like microbes and heavy metals. .
2. Is Your COA From In-House Or Third-Party Testing?
In-house testing has its place, but independent results carry more weight with auditors, retailers and your own customers, because the lab has no stake in whether the product passes. Independent data is much easier to defend if a product is ever challenged by a regulator or customer.
3. Do You Test Every Lot?
A COA from one representative batch says very little about the lot that actually arrives at your dock. Each lot is grown, harvested or produced under slightly different conditions, so contaminant levels and potency can shift from one lot to the next.
4. What’s On Your Contaminant Panel?
For most supplement ingredients, it should cover:
- Microbial contamination, including yeast, mold and pathogens
- Heavy metals, especially for botanicals and minerals
- Pesticide residues for plant-based and organic ingredients
- Mycotoxins for grains, seeds and nuts
- Allergens, especially for ingredients handled in shared facilities
5. How Do You Handle An Out-Of-Specification (OOS) Result?
A retest on its own isn’t an investigation. A good supplier follows a written OOS procedure that includes an investigation, documentation and corrective action, because every supplier sees a failing result eventually. Ask whether they’ll notify you of OOS results on your products, and make sure that’s in your quality agreement.
6. Will Your Data Hold Up For Prop 65?
If you sell in California, Prop 65 sets safe harbor levels for heavy metals like lead, cadmium and arsenic, and exceeding them triggers a warning requirement. Those levels can be stringent and are measured in just a few micrograms per day. A lab needs a quantitation limit low enough to measure those trace amounts accurately, so your supplier’s data should be precise enough to support your Prop 65 decisions.
7. Do You Run An Environmental Monitoring Program?
Clean product starts with a clean facility. Ask a co-packer how often they swab, which areas they test, and what they do when a result comes back positive. A strong program tracks results over time, so they can spot a problem area before it reaches your product.
How New Wave Scientific Can Help
New Wave Scientific is an ISO/IEC 17025:2017 accredited lab based in Nevada. We work with supplement brands, co-packers, private label companies and ingredient suppliers, as well as food and beverage manufacturers.
Raw Materials & Finished Products
We test incoming ingredients against your specifications before they go into production, then confirm the finished batch. Testing includes microbiology, heavy metals, pesticides, mycotoxins, moisture, water activity, and actives and vitamins potency. Running both through one lab makes it easier to trace a problem back to its source.
Environmental Monitoring & HACCP
Your HACCP plan says your sanitation controls work, and environmental monitoring is how you show it. We test swabs from product contact surfaces out through the rest of your facility for indicator organisms and pathogens such as Listeria and Salmonella. Trending those results helps you find problem areas early and keeps documentation ready for auditors.
Food & Beverage Safety
Earlier this year, we expanded into a new 6,000-square-foot microbiology lab, built in collaboration with one of the world’s largest food manufacturers to meet their specific quality standards and requirements. For food and beverage companies, we offer microbiology, heavy metals, pesticides (including NOP pesticide testing for organic claims), mycotoxins, gluten and allergen testing, water activity and moisture, and shelf-life studies.
Find Us At SupplySide Global
We’ll be walking the floor October 28–30, so stop us to say hello and grab a postcard. If you’d like to see our work firsthand, we’re offering new clients a complimentary microbiology panel through the end of the year.
Have a question about testing or want to talk through your program? Contact us or call (775) 525-9444. We’re always happy to help.

